![]() ![]() Now click on the Scatter-Loading button on the left and navigate it to the MTXXXX_Android_scatter_emmc.txt file that you have downloaded.Now it will open a dialogue box named Smart Phone Flash Tool (Runtime Trace Mode) which looks something like this: Double-click/Run the Flash_tool.exe from the extracted SP TOOL PACKAGE.Connect your phone to PC with a USB cable and if a pop-up screen shows up on phone asking you to Allow USB debugging for the computer, make sure you tick the checkbox and tap OK.Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section).└ Note: The Scatter file contains the partition table values of your device, So don’t tamper or modify the Scatter file which may result in bricking your device. ![]() So you will have the following files in the folder: Download the Scatter file, and place it in the same folder where you extracted the firmware package.Extract/Unzip the Firmware file, on your computer (using 7-zip free software, preferably) to get a bunch of image files which include all the necessary images to be flashed on your device.Extract/Unzip the SP Flash Tool file, SP_Flash_Tool.rar on your computer (using 7-zip free software, preferably) to get the files similar to the screenshot below:.You don’t want to format your personal files, right? Important Note: Backup important files stored on internal SD card of your device, as the entire phone will be swipe cleaned at the end of the process. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |